Hearth & Flue, Insulated Flue

..What Are Insulated Room Sealed Flue Kits For Wood Heaters?

Pivot’s INSULATED ROOM SEALED FLUE KIT,

is the most efficient flue system for wood heaters.

The Room Sealed Flue has a great range of benefits;

Is sealed to the room, so no unnecessary heat loss
Increases your heater’s ability to heat your home by 8%
Reduces noise by 90%, no more rattling flue
Constructed entirely from Stainless Steel
BAL rated to BAL-40 and BAL-FZ
Uses twist lock joining on all fittings
The only flue with a 7 year warranty

All tested and approved to AS/NZS 2918:201 Appendix F.

Tested and approved for all make and model wood heaters.

Description

Pivot’s insulated wood heater flue system, or what we call the ROOM SEALED FLUE KIT is the most efficient flue system for wood heaters

It stops unnecessary heat loss, and increases your heaters ability to heat your home by 8% – saving you wood and money

ROOM SEALED FLUE is consist of 150mm ( or 6”) active stainless steel flue that is wrapped in ceramic insulation, the outside flue made from a 200mm ( or 8”) stainless steel : and uses twist lock technology to connect all the lengths.

All tested and approved, this flue kit is perfect for any high started new home, or any home wanting to reduce heat loss

Categories: Hearth & Flue, Insulated Flue Tags: flue kit, high efficience, insulated flue, rsf, wood heater flu, wood heater flue kit

Introducing Room Sealed Flue Kit

Insulated Flue for wood heaters and stoves is the most common flue system used around the world.
It saves heat loss in the home by 8%, reduces flue blockages, and is 90% quieter than other flue kits.

What is insulated flue?

The Room Sealed Flue consists of an inner active stainless steel flue that is wrapped in ceramic insulation. The outer flue is also made of stainless steel.
This all stainless construction gives you longer life expectancy and, being rust free, is perfect for homes in coastal areas.

Benefits of using Insulated Flue?

- 90% quieter than traditional flue.
- All stainless steel construction. Perfect for coastal areas.
- Increased heating. No heat loss.
- Increased heater performance. 20% longer burn time.
- Increases your wood heaters efficiency.
- Safer to install.

Twist lock joins together

No more leaking or rattling flue!
The Insulated Room Sealed Flue Kit uses a twist lock system to join all flue lengths and bends together.
All fittings are supplied with a locking band to lock the joins - no screws required.

Why upgrade to Insulated room sealed flue Kit?

- No heat loss in your home through the flue system. That's an 8% increase in heating.
- 90% quieter than traditional air cooled flue kits.
- It lasts longer, with an all stainless inner and outer construction.
- 7 year warranty.
- Safer and easier to install.

90% quieter

The Room Sealed Flue Kit is an all Stainless Steel construction - Perfect for coastal homes!
And is 90% quieter than all other flues - Perfect for EVERY home!

Same same - but different

The Insulated Room Sealed Flue Kits have a smaller outer diameter, only 200mm.

Our Insulated Flue can be installed as close as 25mm from any timbers or combustibles.

Full range of fittings available

Pivot's Room Sealed Flue is a complete system. A full range of bends, tees, bracing, cowls and length sizing is available
CLICK HERE for the full RSF Catalogue.

Passive House Approved

If you are building a new home, especially a passive home, you need an air-tight flue solution.

The Insulated Room Sealed Flue Kit seals the system at the ceiling, meaning absolutely no heat loss.

BAL Rated

Pivot's Room Sealed Flue is tested and approved to be installed on all make and model wood heaters on the Australian market.

It's the only flue that is BAL rated to BAL-40 and BAL-FZ building requirements.

7 Year Warranty

The Room Sealed Flue Kit comes with a;
- 7 year warranty on the flue
- 1 year on the cowl and painted finish

Specification

dimensions
height	mm
width	mm
depth	mm

Clearances
Rear clearance to combustible	mm
Side clearance to combustible	mm
Corner clearance to combustible	mm
Rear clearance to non combustible	mm
Side clearance to non combustible	mm
Corner clearance to non combustible	mm